Home > News > Content
LED Flood Light Brief Introduction And Characteristics
Oct 10, 2017

LED Flood Light using flood lighting method to make the building facade up, is the invention and landscaping one of the important ways of urban night. This lighting method can not only illuminate the facade of the building, along with the elaborate planning of the lighting planner, but also invent the more tempting than the day of the sensational role, structured, and highlight the characteristics of outstanding buildings. LED Flood Light is a can all the way to all corners of the lake light source, its scale can be arbitrarily adjusted, in the scene as a positive octahedral display.

But the floodlight is only one of the methods of lighting the building, is not the only, must not mention the facade lighting on non-flood lighting must go, facade lighting is not equal to flood lighting. The use of flood lighting of the building should have the following two conditions: First, the appearance of the illuminated building should have a certain reflection ratio. Floodlight that is through the cast light to the light according to the appearance of the building, and then through its reflection, people from the appearance of the survey to see the brightness of the direction. The second is: the appearance of the reflection of the appearance of the building is the best diffuse reflection, at least it is necessary to disperse the reflection, a variety of appearance must have a certain reflection of light, but also because the appearance of the degree of light is not the same reflection is not the same, For the directional reflection, scattered reflection and diffuse three.

Small current, LED flood light temperature is not obvious. If the ambient temperature is high, the main wavelength of the LED Flood Light will be redshift, the brightness will be reduced, uniformity of light, consistency worse. Special lattice, large display of the temperature rise on the LED Flood Light reliability, stability, more obvious impact. So the heat plan is very important. The floodlight shines objects from a specific point in all directions, and uses it to push bulbs and candles better. Floodlights can be placed anywhere in the scene. For example, it can be placed outside of the Kemeira scale, or inside the object. It is common to use floodlights with many different colors in the scene. These floodlights can be shaded and mixed on the model. Because the floodlight is relatively large scale, so the role of floodlight is very simple guess, and this light there are many auxiliary purposes, for example, the floodlight placed in the vicinity of the appearance of the object, On the occurrence of bright light.

LED Flood Light color temperature can be sensitive between 4000-7000K choice, the most up to 80 above the index, the luminous color is closer to the natural light. LED Flood Light source utilization is high, about 90% LED diode light-emitting point of view with the luminous lighting point of view can be consistent, so most of the light is directly illuminated to the designated area, only a small part of the reflection, and thus high light utilization The LED Flood Light do not exist to start the delay question, can always be connected, ready to work, you can easily complete the intelligent energy-saving control.