Home > News > Content
Interpretation Of Outdoor LED Light Design Standards And Lighting Requirements
Sep 22, 2017

With the development of society, now more and more attention to the development of the environment, so the whole country up and down to promote the use of Outdoor LED Light. Outdoor LED Light manufacturers interpret LED street lamp design standards and lighting requirements.

In the case of

Outdoor LED Light and conventional street lamps is different, LED light source with low voltage DC power supply, by the GaN-based power-type blue LED and yellow synthesis of high efficiency white, with high efficiency, safety, energy saving, environmental protection, long life, fast response, high color rendering index Unique advantages can be widely used in roads. High temperature of 135 degrees, low temperature -45 degrees.

In the case of

Outdoor LED Light design has the following requirements:

In the case of

1, the biggest feature of Outdoor LED Light with directional light emission function, because the power LED is almost always equipped with reflectors, and the efficiency of such reflectors are significantly higher than the lamp reflector efficiency.

In the case of

In addition, Outdoor LED Light efficiency detection has been included in the efficiency of its own reflector.

In the case of

Outdoor LED Light should be used as far as possible the use of LED directional light characteristics, so that the road lights in the LED directly to the light were illuminated by the various areas of the road, and then use the auxiliary light reflector light to achieve Very reasonable road lighting integrated light distribution.

In the case of

It should be said that the road lamps to be truly in line with CJJ45-2006 and CIE31 and CIE115 standard illumination and illumination uniformity requirements, the lamp should contain three times with the light function can be better achieved. And with a reflector and has a reasonable beam output angle of the LED itself has a good light distribution function.

In the case of

In the lamp, according to the height of the road lighting and the width of the road design of the LED installation location and the direction of the launch light can achieve a good secondary light distribution function. Reflectors in such lamps, only as a secondary three means of light distribution, to ensure better uniformity of road illumination.